Peavey PV900 PA power amplifiers 1200w.
Peavey power amplifiers 600w (300w RMS) power per channel at 4 ohms. The Peavey PV 900 PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installation, in a compact 2 U rack size.
The PV 900 works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required.
Peavey PV900 PA Power Amplifier Specifications:
(Download PDF manual)
- Power Output: 4 ohms 300w RMS / 600w program per channel
- Power Output: 8 ohms 180w RMS / 360w program per channel
- Power Output Bridge Mode: 8 ohms 600w RMS / 1200w program
- Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge
4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation
- DDT™ COMPRESSION ++: Automatic, switchable with LED indicator
- COOLING SYSTEM: Two-speed DC fan, air flow back to front
- LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave
- CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation
- INPUTS ++: Electronic balanced; Dual XLR or TRS 1/4" (6.3 mm) jack, Barrier Strip
- CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4" (6.3 mm)
- AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts
- LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power
- AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
- LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
- DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
- WEIGHT: 18.2kg (40lbs)
|
